Starwind 860

Steering and throttle cable routing

Control cable routing is often a bit of an afterthought. In a small, simple boat, it's often OK for the designer to more or less ignore the engine controls, and trust that the builder will know how to install them. That approach doesn't work so well for a larger vessel, like the Starwind 860 trimaran, in which the exact routing of each control cable must be planned out to avoid conflicts.

Strut blocks for the Starwind 860

Our current situation, with regards to the construction of the Starwind 860 power trimaran, requires that we stick to small bits: there simply isn't enough space at the moment to build the entire boat. In order to minimize the time for which we'll need a full size build shed, we're starting with the smaller and more fiddly pieces of the boat. These can fit in our current work space, and by having them pre-assembled, we'll save a lot of time during final assembly.

Making the best of mediocre wood

Boatbuilders like to have really good wood. The best stuff is quarter sawn, vertical grain, air dried two years, felled by ceremonial beaver at midnight under a full moon.

What you actually get, especially when buying in small quantities from lumberyards that are unfamiliar with boatbuilding, is plain sawn, a bit warped, and often a bit wet, like the batch of western red cedar I'm using for various small parts of the Starwind 860 power trimaran.

Outrigger struts for the Starwind 860

It's time for another boat parts update! The only way this project is going to make it to completion is if a little bit of work gets done at every possible opportunity. So, slipping in a task or two a day, we are making slow but steady progress on the Starwind 860 trimaran.

The struts that link the 860's crossbeams to her main hull have aluminum end sleeves and a red oak core.

Pages

Subscribe to RSS - Starwind 860